Reisser R2 Countersunk Wood Screws in Industry Packs
		
£28.69 Inc VAT | £23.91 Ex VAT
 
£42.00 Inc VAT | £35.00 Ex VAT
 
£8.83 Inc VAT | £7.36 Ex VAT
 
£8.66 Inc VAT | £7.21 Ex VAT
 
£10.80 Inc VAT | £9.00 Ex VAT
 
£11.56 Inc VAT | £9.63 Ex VAT
 
£13.46 Inc VAT | £11.22 Ex VAT
 
£18.47 Inc VAT | £15.39 Ex VAT
 
£21.74 Inc VAT | £18.12 Ex VAT
 
£11.95 Inc VAT | £9.96 Ex VAT
 
£8.05 Inc VAT | £6.70 Ex VAT
 
£9.02 Inc VAT | £7.51 Ex VAT
 
£9.94 Inc VAT | £8.28 Ex VAT
 
£20.42 Inc VAT | £17.01 Ex VAT
 
£23.07 Inc VAT | £19.23 Ex VAT
 
£12.78 Inc VAT | £10.65 Ex VAT
 
£12.92 Inc VAT | £10.77 Ex VAT
 
£11.68 Inc VAT | £9.73 Ex VAT
 
£12.11 Inc VAT | £10.09 Ex VAT
 
£14.18 Inc VAT | £11.82 Ex VAT
 
£16.11 Inc VAT | £13.42 Ex VAT
 
£16.06 Inc VAT | £13.38 Ex VAT
 
£9.54 Inc VAT | £7.95 Ex VAT
 
£10.83 Inc VAT | £9.03 Ex VAT
 
£23.67 Inc VAT | £19.72 Ex VAT
 
£13.72 Inc VAT | £11.43 Ex VAT
 
 
 
Reisser R2 Countersunk Wood Screws in Industry Packs available to buy online.
- Very sharp 25 ° point with the thread running to the end allowing immediate starting, no need to pre-start. 
 - The sharp, wide, deep thread penetrates into all timbers without a pilot hole, giving exceptional pull-out. 
 - Specially hardened steel gives the R2 maximum tensile and torsional strength. 
 - The invisible Reisser lubricant helps the screw drive in quickly and easily. 
 - Available in full thread (primarily for board materials) or part thread (primarily for pulling two pieces of timber together tight). 
 - The re-enforced collar under the head gives additional support preventing snapping. 
 - The collar also allows a wide, deep pozi to be inserted. This reduces the risk of the bit jumping out and rounding off the edges. 
 - Each batch checked thoroughly to guarantee consistency of quality. 
 - Yellow tropicalized giving approximately 20 times more rust resistance than standard BZP screws. 
 
The sizes range from 3mm x 16mm up to 6mm x 150mm.
Also available in Reisser R2 Screw Tubs.