Reisser 5mm x 30mm R2 Yellow Countersunk Wood Screws available from Cookson Hardware.
Industry Pack of 1000 screws
Reisser R2 high performance wood screws always offer consistent quality with the following features and benefits.
Industry packs offering better value.
Very sharp 25° point with the thread running to the end allowing immediate starting, no need to 'pre-start'.
The sharp, wide, deep thread penetrates into all timbers without a pilot hole, giving exceptional pull-out.
Specially hardened steel gives the R2 maximum tensile and torsional strength.
The invisible Reisser lubricant helps the screw drive in quickly and easily.
Available in full thread (primarily for board materials) or part thread (primarily for pulling two pieces of timber together tight).
The re-inforced collar under the head gives additional support preventing snapping.
The collar also allows a wide, deep pozi to be inserted. This reduces the risk of the bit jumping out and rounding off the edges.
Each batch checked thoroughly to guarantee 'consistence of quality'.
Yellow tropicalized giving approximately 20 times more rust resistance than standard BZP screws.
3.0mm is an approximate equivalent to an old 4s gauge
3.5mm is an approximate equivalent to an old 6s or 7s gauge
4.0mm is an approximate equivalent to an old 8s gauge
4.5mm is an approximate equivalent to an old 9s gauge
5.0mm is an approximate equivalent to an old 10s gauge
6.0mm is an approximate equivalent to an old 12s gauge
|Similar products can be found in these categories:|
|Screws, Nails and Fixings
Reisser R2 Countersunk Wood Screws in Industry Packs|
All Reisser Wood Screws Products