Trend UNIBASE Universal Sub Base c/w Pins & Bush

Trend Universal Sub Base.

Product Reference: UNIBASE

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes, Will fit directly to most routers. Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub base. Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch.

Instructions for fitting:
The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10mm up to 30mm (GB10 - GB32). For larger diameter cutters a 40mm guide bush (GB40) is available.

Dimensions:
Diameter=170mm
Thickness=8mm