Polycrystalline Diamond Tipped (PCD) Cutters

Trend Gemstone Straight Router Bit PCD/GEM01X1/2 PCD Tipped 12.7mm 39mm

£185.75 Inc VAT | £154.79 Ex VAT

Trend PCD/10x1/2 PCD Disposable MDF 12.7mm D x25mm C

£158.01 Inc VAT | £131.68 Ex VAT

Trend PCD/11x1/2 PCD Disposable MDF 15.9mmD x 25mm C

£184.57 Inc VAT | £153.81 Ex VAT

Trend PCD/20x1/2 PCD Serviceable MDF 12.7mmD x 25mmC

£264.24 Inc VAT | £220.20 Ex VAT

Trend PCD/21x1/2 PCD Serviceable MDF x 15.9mmDx25mmC

£264.24 Inc VAT | £220.20 Ex VAT

Trend PCD/22x1/2 PCD Serviceable MDF 19.05mmD x25mmC

£264.24 Inc VAT | £220.20 Ex VAT

Trend PCD/30x1/2 PCD Serviceable ChipB 12.7mmDx25mmC

£237.68 Inc VAT | £198.06 Ex VAT

Trend PCD/31x1/2 PCD Serviceable ChipB 15.9mmDx25mmC

£250.96 Inc VAT | £209.13 Ex VAT

Trend PCD/32x1/2 PCD Serviceable ChipB x19.1mmDx25mm

£250.96 Inc VAT | £209.13 Ex VAT

Trend PCD/40x1/2 PCD Slat Wall Cutter 30mm Diameter

£383.73 Inc VAT | £319.78 Ex VAT

Polycrystalline Diamond tipped router bits give a significant increase in tool life compared to TC tooling.

• PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime.
• Use in fixed head, NC or CNC routers only.
• Use on MDF, HDF, hard natural timber, veneered and laminated particle board, plywood, hardboard and solid laminate.
• Single flute with TC plunge tip.
• For MDF, hardboard and solid laminate.
• Single flute prevents edge lines.
• High wear resistance.
• Longer tool life and therefore reduced downtime.
• Cannot be re-sharpened.