Reisser Cutter Wood Screws Tub 5mm x 70mm from Cookson Hardware.
450 screws inside a re-usable plastic tub, ideal for site use.
Unique design with 2 slots cut into the thread on 30mm screws and above (1 cut up to 25mm) allowing the screw to work closer to the edge of timber and board materials without splitting. Also available in smaller Craft Packs and Handi-Paks.
- Distinct ribs and tucks offer self countersinking into all timber and board materials. No need to counter-bore.
Very sharp 25° needle point with the thread running to the end allowing immediate starting, no need to 'pre-start'.
- Reinforced collar prevents snapping AND gives depth for a wide, deep pozi to be inserted, therefore reducing the risk of "cam-out".
- Lubricated, sharp, wide deep thread offering up to 40% reduction in driving resistance therefore less torque required. Quick and easy penetration WITHOUT a pilot hole.
- Yellow tropicalized giving approximately 20 times more rust resistance than standard BZP screws.
Two patented slots prevent splitting when screwing close to the edge.
5.0mm is an approximate equivalent to an old 10s gauge
Gauge = 5mm
Length = 70mm
|Similar products can be found in these categories:|
|Screws, Nails and Fixings
Reisser Cutter Wood Screws in Tubs|
All Reisser Wood Screws Products